MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET
REVISION NUMBER : 04
REVISED DATE : 01.04.2016
BASIC INFORMATION
Product Shipping Name : MAX – 001 SOFTENING CHEMICAL
Chemical Name & Synonyms : Softening Chemical used to soften the scale deposits
Reactivity : Highly alkaline in nature, Non reactive on all Metals, if exposed
to chemical directly for more than a week continuously, Non
reactive on Plastics, Rubber. Highly reactive on Aluminium.
Product Description
Light white coloured liquid, which is easily soluble in water. Ph :13.0 – 14.0, Non corrosive on all Metals if exposed to chemical directly for more than a week continuously, Non reactive on Plastics, Rubber. Dosage shall vary from 2 – 7 %. Highly reactive on Aluminium.
Manufacturer's Name & Address
Vendor : MAX CHEM CORPORATION
# 2701, 7th Main, H.A.L 3rd Stage
Jeevan Bhima Nagar
Bangalore – 560 075, Karnataka, India.
Contact Person / Numbers : Office : + 91 080 - 25294964( A.Sriinivasulu – Proprietor )
: Cell : + 91 9741414429 ( A.Sriinivasulu – Proprietor )
Email : maxchem@in.com
Website : www.maxchem.in
PRINCIPLE INGREDIENTS
This chemical is used for softening the scales. It is a mixture of Tri Sodium Phosphate ( T.S.P – 20 % ), Foam Generating Chemicals ( 3 % ), PH Boosters ( 12 % ), Wetting Agents ( 20 % ), Alkaline Chemical ( Sodium Hydroxide – 15 % ), Remaining - Water etc., All these chemicals are used for softening the scales and render safe for the parent metal.
PHYSICAL & CHEMICAL PROPERTIES
Appearance & odor : Pale white coloured liquid with slight pungent smell
Solubility : Easily soluble in water
Chemical state : Highly alkaline and Non Corrosive
Fire point : Nil
Flash point : Nil
Specific gravity : 1.01 - 1.04
pH : 13.0 - 14.0
REACTIVITY DATA
Stability : Stable
Conditions to avoid : Do not Inhale, Do not keep the cap loosely or opened
Materials to avoid : Do not spill anywhere, Should be directly dosed to be descaled lines.
Hazardous decomposition
This chemical should not come in contact with human body, especially with eyes, unhealed cuts, nose, skin etc., it should not be inhaled as it is concentrated with slight pungent smell. Please use goggles and hand gloves while handling.
FIRST AID PRECAUTIONS
Eyes / Skin / Unhealed Cuts : Flush with fresh and clean water thoroughly and immediately for
5 – 10 minutes. If there is still any kind of irritation, please take
medical care immediately. Wear safety glasses as a safety and
precautionary measure
Nose : Do not try to smell or inhale, as it is concentrated and with slight
pungent smell.
Spill on floors : Please wash with water immediately till the slippery feeling goes. A white patch will be left behind after it dries, which will gradually
disappear over a period of time.
Swallowed : Give cold milk immediately and then take medical care at once.
Symptoms of exposure : Nothing serious. Wash with water thoroughly and take fresh air
for 10 – 15 minutes. No need for Medical attention.
FIRE & EXPLOSION HAZARD DATA
Flammable limits : Fire point is Nil and Non explosive
HANDLING INFORMATION
The material comes in plastic carbouys packing. The cap of the carbouys should be tightly closed after each use to avoid leakage and loss of concentration. Shake the contents before every use. The chemical should be used within a period of 6 months from the date of supply, for good results. The material should be stored at room temperature. However, the chemical does’nt ignite at high or low temperatu mentioned information especially about the composition and chemical properties is approxires.
Waste disposal method
Unused and used chemical has to be sent to be ETP before disposal.
EXPOSURE CONTROLS & PERSONAL PROTECTION
Eye protection : Wear Goggles
Skin protection : Wear Hand Gloves
Ventilation recommended : Normal
Respiratory protection : Wear Nose Masks
Please note: The above mentioned information especially about the composition and chemical properties is approximate and their may be subsequent changes depending on the usage and the metal to which is comes in contact with. Do not try to experiment on the above information and we shall not be responsible for any such kind of acts and hazards arising out of it.
We request the consumers to review this information carefully before use and disposal.
MATERIAL SAFETY DATA SHEET
REVISION NUMBER : 03
REVISED DATE : 01.04.2017
BASIC INFORMATION
Product Shipping Name : MAX – 002 DESCALING CHEMICAL
Chemical Name & Synonyms : Descaling Chemical is used to remove the scale deposits
Reactivity : Highly corrosive in nature, Reactive on all Metals, if exposed
to chemical directly for more than a week continuously, Non
reactive on Plastics, Rubber. Highly reactive on Aluminium.
Product Description
This chemical is used for descaling process, which means it is a process of removing the scales. This chemical is acidic in nature. It is formulated by using Descaling agents ( 45 % ), Foam generating chemicals ( 5 % ), Corrosion Inhibitors ( For HCl and Descaling agents – 15 % ), HCl ( 15 % ), pH reducers ( 10 % ), Remaining Water etc., Corrosion inhibitors are used to render safe for metal parts like Copper, MS, GI, SS, Brass, “O” rings etc., Foam generating chemicals are used for generating foam during descaling, so that the scales easily floats and gets released from the system. Highly reactive on Aluminium.
Manufacturer's Name & Address
Vendor : MAX CHEM CORPORATION
# 2701, 7th Main, H.A.L 3rd Stage
Jeevan Bhima Nagar
Bangalore – 560 075, Karnataka, India.
Contact Person / Numbers : Office : + 91 080 - 25294964( A.Sriinivasulu – Proprietor )
: Cell : + 91 9741414429 ( A.Sriinivasulu – Proprietor )
Email : maxchem@in.com
Website : www.maxchem.in
PRINCIPAL INGREDIENTS
It is formulated by using Descaling agents ( 45 % ), Foam generating chemicals ( 5 % ), Corrosion Inhibitors ( For HCl and Descaling agents – 15 % ), HCl ( 15 % ), pH reducers ( 10 % ), Remaining Water etc.,
PHYSICAL & CHEMICAL PROPERTIES
Appearance & odor : Pale pink coloured liquid with pungent smell
Solubility : Easily soluble in water
Chemical state : Highly Acidic and Corrosive
Fire point : Nil
Flash point : Nil
Specific gravity : 1.01 - 1.02
pH : 1.0 - 1.5
REACTIVITY DATA
Stability : Stable
Conditions to avoid : Do not Inhale, Do not keep the cap loosely or opened
Materials to avoid : Do not spill anywhere, should be directly dosed to be descaled lines.
Hazardous decomposition
This chemical should not come in contact with human body, especially with eyes, unhealed cuts, nose, skin etc., it should not be inhaled as it is concentrated with pungent smell. Please use goggles and hand gloves while handling.
FIRST AID PRECAUTIONS
Eyes / Skin / Unhealed Cuts : Flush with fresh and clean water thoroughly and immediately for
5 – 10 minutes. If there is still any kind of irritation, please take
medical care immediately. Wear safety glasses as a safety and
precautionary measure
Nose : Do not try to smell or inhale, as it is concentrated and with
pungent smell.
Spill on floors : Please wash with water immediately till the bubbling goes.
A white patch will be left behind after it dries, which will gradually
disappear over a period of time.
Swallowed : Give cold milk immediately and then take medical care at once.
Symptoms of exposure : Nothing serious. Wash with water thoroughly and take fresh air
for 10 – 15 minutes. No need for Medical attention.
FIRE & EXPLOSION HAZARD DATA
Flammable limits : Fire point is Nil and Non explosive
HANDLING INFORMATION
The material comes in plastic carbouy packing. The cap of the carbouys should be tightly closed after each use to avoid leakage and loss of concentration. The chemical should be used within a period of 6 months from the date of supply, for good results. The material should be stored at room temperature. However, the chemical does’nt ignite at high or low temperatures.
Waste disposal method
Unused and used chemical has to be sent to be ETP before disposal.
EXPOSURE CONTROLS & PERSONAL PROTECTION
Eye protection : Wear Goggles
Skin protection : Wear Hand Gloves
Ventilation recommended : Normal
Respiratory protection : Wear Nose Masks
Please note: The above mentioned information especially about the composition and chemical properties is approximate and their may be subsequent changes depending on the usage and the metal to which is comes in contact with. Do not try to experiment on the above information and we shall not be responsible for any such kind of acts and hazards arising out of it.
We request the consumers to review this information carefully before use and disposal.
MATERIAL SAFETY DATA SHEET
REVISION NUMBER : 04
REVISED DATE : 01.04.2016
BASIC INFORMATION
Product Shipping Name : MAX – 003 PASSIVATION CHEMICAL
Chemical Name & Synonyms : Passivation Chemical is used to passivate the previous chemical.
Reactivity : Highly alkaline in nature, Non reactive on all Metals, if exposed
to chemical directly for more than a week continuously, Non
reactive on Plastics, Rubber. Highly reactive on Aluminium.
Product Description
Light white coloured liquid, which is easily soluble in water. Ph :13.0 – 14.0, Non corrosive on all Metals if exposed to chemical directly for more than a week continuously, Non reactive on Plastics, Rubber. Dosage shall vary from 2 – 7 %. Highly reactive on Aluminium.
Manufacturer's Name & Address
Vendor : MAX CHEM CORPORATION
# 2701, 7th Main, H.A.L 3rd Stage
Jeevan Bhima Nagar
Bangalore – 560 075, Karnataka, India.
Contact Person / Numbers : Office : + 91 080 - 25294964( A.Sriinivasulu – Proprietor )
: Cell : + 91 9741414429 ( A.Sriinivasulu – Proprietor )
Email : maxchem@in.com
Website : www.maxchem.in
PRINCIPAL INGREDIENTS
This chemical is used for softening the scales. It is a mixture of Tri Sodium Phosphate ( T.S.P – 20 % ), Foam Generating Chemicals ( 3 % ), PH Boosters ( 12 % ), Alkaline Chemical ( Sodium Hydroxide – 15 % ), Remaining - Water etc., All these chemicals are used for softening the scales and render safe for the parent metal.
PHYSICAL & CHEMICAL PROPERTIES
Appearance & odor : Pale white coloured liquid with slight pungent smell
Solubility : Easily soluble in water
Chemical state : Highly alkaline and Non Corrosive
Fire point : Nil
Flash point : Nil
Specific gravity : 1.01 - 1.02
pH : 13.0 - 14.0
REACTIVITY DATA
Stability : Stable
Conditions to avoid : Do not Inhale, Do not keep the cap loosely or opened
Materials to avoid : Do not spill anywhere, Should be directly dosed to be descaled lines.
Hazardous decomposition
This chemical should not come in contact with human body, especially with eyes, unhealed cuts, nose, skin etc., it should not be inhaled as it is concentrated with slight pungent smell. Please use goggles and hand gloves while handling.
FIRST AID PRECAUTIONS
Eyes / Skin / Unhealed Cuts : Flush with fresh and clean water thoroughly and immediately for
5 – 10 minutes. If there is still any kind of irritation, please take
medical care immediately. Wear safety glasses as a safety and
precautionary measure
Nose : Do not try to smell or inhale, as it is concentrated and with slight
pungent smell.
Spill on floors : Please wash with water immediately till the slippery feeling goes. A white patch will be left behind after it dries, which will gradually
disappear over a period of time.
Swallowed : Give cold milk immediately and then take medical care at once.
Symptoms of exposure : Nothing serious. Wash with water thoroughly and take fresh air
for 10 – 15 minutes. No need for Medical attention.
FIRE & EXPLOSION HAZARD DATA
Flammable limits : Fire point is Nil and Non explosive
HANDLING INFORMATION
The material comes in plastic carbouys packing. The cap of the carbouys should be tightly closed after each use to avoid leakage and loss of concentration. Shake the contents before every use. The chemical should be used within a period of 6 months from the date of supply, for good results. The material should be stored at room temperature. However, the chemical does’nt ignite at high or low temperatures.
Waste disposal method
Unused and used chemical has to be sent to be ETP before disposal.
EXPOSURE CONTROLS & PERSONAL PROTECTION
Eye protection : Wear Goggles
Skin protection : Wear Hand Gloves
Ventilation recommended : Normal
Respiratory protection : Wear Nose Masks
Please note: The above mentioned information especially about the composition and chemical properties is approximate and their may be subsequent changes depending on the usage and the metal to which is comes in contact with. Do not try to experiment on the above information and we shall not be responsible for any such kind of acts and hazards arising out of it.
We request the consumers to review this information carefully before use and disposal.
MATERIAL SAFETY DATA SHEET
REVISION NUMBER : 04
REVISED DATE : 01.04.2016
BASIC INFORMATION
Product Shipping Name : MAX – 100 ANTISCALANTS
Chemical Name & Synonyms : Antiscalant to keep scales in unsaturation form.
Reactivity : Slightly corrosive on all Metals if exposed to chemical directly for more than a week continuously, Non reactive on Plastics, Rubber.
Product Description
Light pink coloured liquid, which is easily soluble in water. Ph : 2.0 – 3.0, Slightly corrosive on all Metals if exposed to chemical directly for more than a week continuously, Non reactive on Plastics, Rubber. To be dosed at PPM levels.
Manufacturer's Name & Address
Vendor : MAX CHEM CORPORATION
# 2701, 7th Main, H.A.L 3rd Stage
Jeevan Bhima Nagar
Bangalore – 560 075, Karnataka, India.
Contact Person / Numbers : Office : 080 - 25294964 ( A.Sriinivasulu – Proprietor )
: Cell : 9741414429 ( A.Sriinivasulu – Proprietor )
Email : maxchem@in.com
Website : www.maxchem.in
PRINCIPAL INGREDIENTS
This chemical is used for suppressing the scale formation in cooling water lines. It controls the deposition of scales by not allowing the scales to precipitate. This chemical is a mixture of organic and inorganic compounds like H.E.D.P, Anti Corrosive Chemicals, Sodium Iodate, Ph Reducers, etc., This is only for your kind information and do not experiment on these details.
PHYSICAL & CHEMICAL PROPERTIES
Appearance & odor : Pale pink coloured liquid with pungent smell
Solubility : Easily soluble in water
Chemical state : Acidic and Corrosive
Fire point : Nil
Flash point : Nil
Specific gravity : 1.01-1.02
pH : 2.0 – 3.0
REACTIVITY DATA
Stability : Stable
Conditions to avoid : Do not Inhale, Do not keep the cap loosely or opened
Materials to avoid : None
Hazardous decomposition
This chemical should not come in contact with human body, especially with eyes, unhealed cuts, nose, skin etc., it should not be inhaled as it is concentrated with pungent smell. Please use goggles and hand gloves while handling. The cooling tower water should not be used for washing face or vessels, nor for bathing purposes and at the same time it can be used for watering plants.
FIRST AID PRECAUTIONS
Eyes / Skin / Unhealed Cuts : Flush with fresh and clean water thoroughly and immediately for
5 – 10 minutes. If there is still any kind of irritation, please take
medical care immediately. Wear safety glasses as a safety and
precautionary measure
Nose : Do not try to smell or inhale, as it is concentrated and very strong
with pungent smell.
Spill on floors : Please wash with water immediately till the slippery feeling goes.
A white patch will be left behind after it dries, which will gradually
disappear over a period of time.
Swallowed : Give cold milk immediately and then take medical care at once.
Symptoms of exposure : Nothing serious. Wash with water thoroughly and take fresh air
for 10 – 15 minutes. No need for Medical attention.
FIRE & EXPLOSION HAZARD DATA
Flammable limits : Non-flammable
HANDLING INFORMATION
The material comes in plastic carbouys packing. The cap of the carbouys should be tightly closed after each use to avoid leakage and loss of concentration. The chemical should be used within a period of 6 months from the date of supply, for good results. The material should be stored at room temperature. However, the chemical does’nt ignite at high or low temperatures.
Waste disposal method
Unused chemical has to be sent to be ETP before disposal.
EXPOSURE CONTROLS & PERSONAL PROTECTION
Eye protection : Wear Goggles
Skin protection : Wear Hand Gloves
Ventilation recommended : Normal
Respiratory protection : Wear Nose Masks
Please note: The above mentioned information especially about the composition and chemical properties is approximate and their may be subsequent changes depending on the usage and the metal to which is comes in contact with. Do not try to experiment on the above information and we shall not be responsible for any such kind of acts and hazards arising out of it.
We request the consumers to review this information carefully before use and disposal.
MATERIAL SAFETY DATA SHEET
CHEMICAL AND COMPANY SPECIFICATION
Chemical Name : Biocides
Product Code : MAX – 200 & MAX – 300
Vendor : MAX CHEM CORPORATION
# 2701, 7th Main, H.A.L 3rd Stage
Jeevan Bhima Nagar
Bangalore – 560 075.
Contact Numbers : Office : 080 - 25294964 ( A.Srinivasulu – Propreitor )
: Cell : 9741414429 ( A.Srinivasulu – Propreitor )
Email : maxchem@in.com
Website : www.maxchem.in
COMPOSITION & INGREDIENTS FOR MAX – 200 & MAX – 300
This chemical is used for controlling the fungus deposits in the cooling towers. The fungus or algae will deposit in the cooling water lines when the system is directly or partially exposed to sunlight. This chemical is a mixture of Chlorine, Boroquate and T.S.P ( Tri Sodium Phosphate ) etc., This is only for your kind information and do not experiment on these details.
HAZARDS IDENTIFICATION
This chemical should not come in contact with human body, especially with eyes, unhealed cuts, nose, skin etc., it should not be inhaled as it is concentrated with pungent smell.
FIRST AID PRECAUTIONS
Eyes / Skin / Unhealed Cuts : Flush with fresh and clean water thoroughly and immediately for
5 – 10 minutes. If there is still any kind of irritation, please take
medical care immediately. Wear safety glasses as a safety and
precautionary measure
Nose : Do not try to smell or inhale, as it is concentrated and very strong
with pungent smell.
Spill on floors : Please wash with water immediately till the slippery feeling goes. A white patch will be left behind after it dries, which will gradually
disappear over a period of time.
HANDLING AND STORAGE
The material comes in plastic carbouys packing. The cap of the carbouys should be tightly closed after each use to avoid leakage and loss of concentration. The chemical should be used within a period of 6 months from the date of supply, for good results. The material should be stored at room temperature. Avoid keeping it in high temperature areas. Please shake the contents well before each use. The chemical does’nt ignite at high or low temperatures.
PHYSICAL AND CHEMICAL PROPERTIES
Appearance and odour : White slippery liquid with strong pungent smell.
PH : 06 - 08
Viscosity : 1.2 – 1.3 ( At room temperature )
ECOLOGICAL INFORMATION
The chemical is environmentally eco-friendly when used in the cooling towers, that is, when mixed with water and the blow down water of the cooling tower can be used for watering the plants.
Please note: The above mentioned information especially about the composition and chemical properties is approximate and there may be subsequent changes depending on the usage and the metal to which is comes in contact with. Do not try to experiment on the above information and we shall not be responsible for any such kind of acts and hazards arising out of it.
We request the consumers to review this information carefully before use and disposal.
We remain,
Very truly yours
for MAX CHEM CORPORATION
A.Sriinivasulu
Proprietor